Smoke, soot, and water damage handled fast in King County

Apartment Fire Cleanup MEDINA WA Done Right the First Time

Apartment Fire Cleanup MEDINA WA starts with a call and ends with a unit you can live in again. We pull soot off shared walls, dry the water firefighters left behind, and clear smoke odor from every room. If you need condo fire damage cleanup in MEDINA after a kitchen flare-up or an electrical fire, our crew is on call 24/7 and works directly with your landlord and insurer.

↗
Fast online booking

Request service today

Tell us what is happening. Our local team will confirm your visit shortly.

No spam. No obligation. Just practical help.
Thanks — we'll call shortly to confirm your visit.
Fire Damage Restoration Medina — Fire Damage Restoration you can rely on
Careful work. Honest options.
About this service

What Apartment Fire Cleanup MEDINA WA Really Involves

Apartment Fire Cleanup MEDINA WA is the restoration work that removes soot, smoke residue, charred material, and firefighting water from a unit and the shared structure around it. A fire in a multi-unit building rarely stays in one room. Smoke pushes through door gaps, HVAC returns, and outlet boxes, so the unit two doors down can smell like a campfire for months. We test surfaces with a moisture meter and thermal imaging camera, then clean, dry, and deodorize until readings come back normal.

In MEDINA, most calls we take are kitchen fires, electrical fires behind older walls, and balcony or attic incidents in the Downtown Medina and Lake Medina Area buildings. Firefighting water is the part most people underestimate: a 10-minute suppression effort can leave 200 to 400 gallons inside walls and subfloor. Left alone, that moisture turns into mold growth in 48 to 72 hours. That is why we treat every MEDINA apartment fire cleanup as a water job and a smoke job at the same time.

  • ✓ Odor Gone, Not Masked
  • ✓ Shared Walls Handled Correctly
  • ✓ Water Dried Before Mold Starts
  • ✓ Insurance Paperwork We Handle
What's included

What Our Apartment Fire Cleanup Includes

Every MEDINA apartment fire cleanup starts with an inspection and a written scope. Emergency work, cleaning, deodorization, and documentation are included. Rebuild is scoped separately once the structure is dry and clean, so you always know which phase you are paying for.

✓

Emergency Board-Up and Extraction

Openings get secured and standing water comes out the same day. We isolate power where needed and set drying equipment before we leave, which protects the unit below and the shared structure from further damage.

✓

Soot and Residue Cleaning

Ceilings, walls, cabinets, and fixtures get HEPA-vacuumed and wiped with soot sponges. We clean HVAC ducts and seal them where smoke traveled, which is the step that stops odor from recirculating every time the heat runs.

✓

Structural Drying

Industrial dehumidifiers and air movers run until framing and subfloor read dry on a moisture meter, usually 3 to 4 days. We log readings daily and share them with your adjuster as proof the unit is dry.

✓

Deodorization

Hydroxyl generators, ozone generators, and thermal fogging reach cavities and soft goods that surface cleaning cannot. Charcoal odor absorbers stay in closets and cabinets for the final pass. We do not sign off until the unit passes an odor walk-through.

✓

Documentation and Rebuild Scope

Photos, moisture logs, and a written scope go to you and your insurer. Rebuild, including drywall, paint primer, and trim, is quoted as a separate phase so you can approve it with full information.

How it works

How Our Apartment Fire Cleanup Process Works

01

Emergency Call

You call (833) 929-6186 and describe the unit. We ask about the fire's origin, whether the power is off, and whether the building has a sprinkler system. A crew is dispatched the same day, and we coordinate access with your landlord or property manager so you are not stuck in the middle.

02

Inspection and Scope

We walk the unit with a thermal imaging camera and moisture meter, check the HVAC ducts for smoke intrusion, and photograph everything. Within a few hours you get a written scope separating emergency work from rebuild. Expect this inspection to take 60 to 90 minutes in a typical one-bedroom.

03

Board-Up and Water Extraction

Open windows and doors get secured, and standing water comes out with extraction units before it reaches the unit below. We set industrial dehumidifiers and air movers the same day. This is the step that protects the building's shared structure and the neighbors' ceilings.

04

Soot and Smoke Removal

Crews HEPA-vacuum ceilings and walls, wipe with soot sponges, and remove charred drywall, insulation, and lumber with a drywall saw and pry bar. HVAC ducts get sealed and cleaned. Then hydroxyl generators and thermal fogging run to neutralize lingering smoke odor in framing and cavities.

05

Final Verification and Rebuild

We re-check moisture readings, do a light odor test, and walk the unit with you before rebuild starts. Drywall, paint primer, and trim go back in, and we hand over documentation for your insurer. Most apartments are back to move-in condition in 2 to 4 weeks depending on the rebuild scope.

Tools & methods

Tools and Methods We Use on Every Job

Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.

Thermal Imaging Camera

Finds smoke and water travel inside walls and ceilings before we cut. It shows us where the party wall is actually affected, which keeps demolition to the minimum the job requires.

HEPA Vacuum and Air Scrubber

Captures fine soot and airborne particles instead of pushing them around. Air scrubbers with HEPA filters run during demolition to protect the rest of the building's air quality.

Industrial Dehumidifier and Air Mover

Dri-Eaz and Phoenix Restoration Equipment units pull moisture out of framing and subfloor. We run them until moisture meter readings match dry standard, usually 3 to 4 days.

Hydroxyl and Ozone Generators

Neutralize smoke odor in cavities, ducts, and soft goods after the soot is physically removed. Ozone is used only in unoccupied spaces, and hydroxyl generators run safely during the workday.

Soot Sponges and Encapsulant Sealer

Dry soot removal before wet cleaning, then a sealer coat on framing and drywall paper so stains and odor do not bleed through the new paint.

Moisture Meter

Gives us a number for every wall and floor, logged daily. Those readings are what your adjuster uses to approve the drying phase and close the water portion of the claim.

Real results

Before and after.

Kitchen Fire in a Downtown Medina Rental

Before

A grease fire scorched the range hood and left sticky soot on cabinets, ceiling, and the hallway wall. The tenant had wiped the walls with a wet rag, which smeared the residue and set the staining deeper into the paint.

After

We degreased the cabinets, HEPA-vacuumed and sponge-cleaned the ceiling, sealed the stained drywall with encapsulant, and repainted. The range hood was replaced. The unit passed an odor walk-through in 4 days and the tenant moved back in on day 6.

Electrical Fire in a Medina Square Condo

Before

An outlet fire charred the wall cavity and smoke spread into the bedroom closet. Sprinkler activation left about 150 gallons of water in the subfloor and the ceiling of the unit below.

After

We opened the wall, removed charred wiring and insulation, extracted water from both units, and dried framing to dry standard in 3 days. The cavity was sealed, patched, and repainted. Moisture readings were logged daily and sent to both insurers.

Balcony Fire at a Lake Medina Area Building

Before

A balcony fire sent smoke through the top-floor units overnight. Three apartments smelled of smoke, and the shared ductwork was pushing odor into a fourth unit every time the heat ran.

After

We cleaned and sealed the shared ducts, HEPA-vacuumed and fogged all three units, and ran air scrubbers during the work. All three units cleared for occupancy within 5 days, and the fourth unit's odor complaint stopped after the duct cleaning.

Problems we solve

Problems We Solve After a MEDINA Apartment Fire

The fire is the visible problem. The expensive problems show up in the days after: odor in the ducts, water in the ceiling below, and soot that etches the finish off metal fixtures. Here is what we fix and why it matters.

Ask a pro →
01

Lingering smoke odor in walls and closets

We remove the soot first, then run hydroxyl generators and thermal fogging to neutralize the residue in cavities. Charcoal odor absorbers finish the job in closets. Most units pass an odor walk-through within 3 to 5 days.

↗
02

Water damage from firefighting in the unit below

We extract standing water the same day and set industrial dehumidifiers and air movers with daily moisture meter readings. Catching it in the first 48 hours is what keeps the job a cleanup instead of a mold project.

↗
03

Soot residue on walls, ceilings, and fixtures

Crews HEPA-vacuum dry first, then use soot sponges on ceilings and walls before any wet cleaning. Fixtures get cleaned or replaced. Surfaces that will be repainted get an encapsulant sealer so stains do not bleed through the new coat.

↗
04

Smoke-damaged HVAC ducts spreading odor

We inspect ducts with a thermal imaging camera, clean and seal them with duct sealing tape where needed, and run air scrubbers with HEPA filters during the work. That stops the cross-contamination at the source.

↗
Proof you can check

Licensed, Certified, and Documented

✓
IICRC Fire and Smoke Restoration Technician (FSRT)Institute of Inspection, Cleaning and Restoration Certification
✓
IICRC Water Damage Restoration Technician (WRT)Institute of Inspection, Cleaning and Restoration Certification
✓
EPA Lead-Safe Certified FirmU.S. Environmental Protection Agency
✓
Washington State Contractor LicenseWashington State Department of Labor & Industries
✓
King County Business LicenseKing County, Washington
Good questions

Frequently Asked Questions

(833) 929-6186 →

Most MEDINA apartment fire cleanups run $2,500 to $12,000 in 2026, with a typical one-bedroom smoke and water job landing near $4,500. Cost depends on how far smoke traveled, how much drywall has to come out, and whether the unit below needs ceiling repair. Insurance usually covers the structural portion. We give you a written scope before demolition so there are no surprise line items.

We do, and we are set up for multi-unit buildings. Call (833) 929-6186 and we will coordinate with your HOA or property manager, secure the unit, and start extraction the same day. We carry the certifications and insurance documentation most MEDINA building managers ask for before they allow a vendor on site.

Shared walls get tested before anything is opened. We use a thermal imaging camera and moisture meter to find where smoke and water crossed the party wall, then remove only the drywall that is actually contaminated. In most cases that is a 2-foot by 4-foot section, not the whole wall. We seal the cavity, treat it, and patch it back to code.

Yes, most landlord and renters policies cover structural cleanup, smoke remediation, and water damage from firefighting. Renters insurance typically covers contents and temporary housing. We photograph everything, log moisture readings, and bill most carriers directly, which usually shortens approval to a few business days instead of weeks.

Ready when you are

Get Apartment Fire Cleanup MEDINA WA Started Today

One call gets a crew moving on your unit, your documentation, and your insurance claim. We are licensed, insured, and on call 24/7 for MEDINA and King County. Call now and we will tell you exactly what happens next.

Call for Cleanup (833) 929-6186 →
Request an appointment

Contact Our MEDINA Fire Damage Restoration Team

Call (833) 929-6186 any hour of the day. Our line is staffed 24/7, and we dispatch same-day across Medina, Downtown Medina, and the surrounding King County townships. If you prefer email, send photos and your address to info@firedamagerestorationmedina.com and we will call you back within the hour.

Request received — our team will be in touch shortly.
Tap to call(833) 929-6186