Fast, thorough soot cleanup for Medina homes and businesses

Soot Removal MEDINA WA That Clears the Air and the Walls

When a fire leaves behind oily black residue, Soot Removal MEDINA WA is the step that makes a house livable again. We pull soot off walls, ceilings, framing, and ductwork, then kill the smoke odor at the source. Our team handles soot cleanup in MEDINA, Washington for homeowners, landlords, and business owners who need it done right the first time. Call (833) 929-6186.

↗
Fast online booking

Request service today

Tell us what is happening. Our local team will confirm your visit shortly.

No spam. No obligation. Just practical help.
Thanks — we'll call shortly to confirm your visit.
Soot Removal you can count on
Careful work. Honest options.
About this service

What Soot Removal MEDINA WA Actually Involves

Soot Removal MEDINA WA is a specialized cleaning and decontamination process that removes acidic, oil-based fire residue from every surface it touched. Soot is not ash you can wipe away with a rag. It is a fine, sticky particle that bonds to drywall, paint, and wood, and it keeps corroding metal and staining surfaces for weeks after the flames are out. We start with a thermal imaging camera and moisture meter to map where the residue traveled, then work surface by surface with HEPA vacuums, soot sponges, and chemical sponges matched to the material.

In Medina, most soot jobs we see start in the kitchen or near the electrical panel. A grease fire throws a wet, smeary soot that ruins painted cabinets. An electrical fire leaves dry, powdery residue that drifts into HVAC returns and coats the inside of ducts. If you are searching for soot cleanup near me MEDINA after a small fire, the sooner we get in, the more we save. Residue sets within 72 hours, and after that, porous materials like drywall paper and upholstery often cannot be cleaned, only replaced.

  • ✓ Stop the Corrosion Clock
  • ✓ Clear the Smoke Odor
  • ✓ Protect Indoor Air Quality
  • ✓ Save What Can Be Saved
What's included

What Our Soot Removal Service Includes

Every soot job is different, but the core scope is consistent. Here is what is included when we handle soot removal in MEDINA, Washington, and what we will tell you upfront if your job needs something beyond it.

✓

Full Surface Cleaning

Walls, ceilings, trim, doors, and framing are cleaned with the method matched to the surface: HEPA vacuum and dry sponges for dry soot, soot sponges and pH-matched cleaner for oily residue. We work top-down so nothing gets re-soiled.

✓

HVAC and Duct Cleaning

Soot travels through returns and ducts and comes back into the house every time the system runs. We seal and clean the accessible ductwork, replace filters, and run air scrubbers to bring airborne particulate counts down before we finish.

✓

Odor Neutralization

We run hydroxyl generators or, in unoccupied spaces, an ozone generator for 12 to 24 hours depending on square footage. Thermal fogging reaches cavities that wiping cannot. The goal is neutralized odor, not a perfume cover-up.

✓

Sealing and Encapsulation

After cleaning, exposed framing and drywall paper get an encapsulant sealer or paint primer. This locks in any residue the cleaner could not lift and prevents bleed-through after repainting. It is the step that makes the cleanup last.

✓

Documentation for Insurance

Photos of every affected surface, moisture readings, and a written scope. We hand this to you and your adjuster so the claim moves faster and there is no dispute over what was damaged and what was cleaned.

How it works

Our Soot Removal Process, Step by Step

01

Emergency Assessment

We arrive, walk the property with you, and photograph every affected room. A thermal imaging camera and moisture meter tell us how far the soot and firefighting water traveled. You get a written scope and a price before any work starts, usually within 60 to 90 minutes of our arrival.

02

Containment and Air Control

We set up negative air machines and plastic containment so soot does not migrate into clean rooms while we work. Air scrubbers with HEPA filters run continuously. On larger jobs, this stage alone takes two to three hours and is the difference between cleaning one room and cleaning a whole floor.

03

Dry Soot Removal

Dry, powdery soot comes off first with HEPA vacuums and dry chemical sponges. We work top-down, ceiling to floor, so residue does not fall onto surfaces we already cleaned. This stage typically runs four to eight hours per affected room, depending on how much porous material is involved.

04

Wet Cleaning and Sealing

Oily, smeary soot needs a different approach: soot sponges, then a pH-matched cleaner, then a rinse. Once surfaces are dry, we seal exposed framing and drywall paper with an encapsulant sealer or paint primer. That locks in any residue the cleaner could not lift and prevents bleed-through later.

05

Odor Treatment and Final Walkthrough

We run hydroxyl generators or an ozone generator (in unoccupied spaces only) for 12 to 24 hours, depending on the size of the job. Then we do a final walkthrough with you, check the air quality, and hand over a written summary. If anything is not right, we come back.

Tools & methods

Tools and Methods We Use for Soot Cleanup

Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.

HEPA Vacuum

Pulls dry soot off surfaces and out of crevices without blowing fine particles back into the air. We use it first on every job, before any wet cleaning.

Thermal Imaging Camera

Maps where soot and firefighting water traveled behind walls and above ceilings. It tells us what to open up and what can stay closed.

Air Scrubber with HEPA Filters

Runs continuously during the job to capture airborne soot particles and keep them from settling on surfaces we already cleaned.

Hydroxyl Generator

Neutralizes smoke odor in occupied or semi-occupied spaces. We run it for 12 to 24 hours depending on square footage and how deep the odor has penetrated.

Ozone Generator

Used only in unoccupied spaces for severe odor. It is effective but requires the space to be empty, so we schedule it around your move-out or relocation.

Dri-Eaz and Phoenix Restoration Equipment Dehumidifiers

Removes the moisture left behind by firefighting water so mold does not start growing while we are cleaning soot.

Soot Sponges and Chemical Sponges

Dry sponges lift loose soot; chemical sponges handle oily residue on painted surfaces and trim without smearing it deeper into the material.

Real results

Before and after.

Kitchen Grease Fire in Downtown Medina

Before

A grease fire left a sticky black film on cabinets, ceiling, and range hood. The homeowner had tried wiping it with a household cleaner, which smeared the soot and made it worse. The smoke smell had settled into the adjacent dining room.

After

We degreased the cabinets with a pH-matched cleaner, cleaned the ceiling and hood, sealed the framing, and ran a hydroxyl generator for 18 hours. The kitchen was usable again in three days, and the cabinets were saved instead of replaced.

Electrical Fire in a Medina Square Rental

Before

An electrical fire in a rental unit left dry soot in the panel area and HVAC returns. The landlord needed the unit back online fast, and the tenant needed a scope that worked for the lease and the insurance claim.

After

We cleaned the wiring cavities, sealed and cleaned the accessible ducts, replaced filters, and documented every surface with photos and moisture readings. The unit was ready for the tenant in three days, and the claim moved through without a dispute.

Attic Fire Near Lake Medina

Before

An attic fire sent soot down through the insulation and into two second-floor bedrooms. The curtains, bedding, and carpet all carried smoke odor, and the homeowner assumed they would have to be thrown out.

After

We removed and replaced the insulation, cleaned the rafters and roof decking, cleaned the bedroom surfaces and soft goods, and ran hydroxyl generators for 24 hours. About 80 percent of the soft goods were saved, and the smoke smell was gone.

Problems we solve

Soot Problems We Solve in MEDINA

Soot damage is not one problem, it is several at once. These are the issues we hear about most from Medina homeowners and landlords, and how we handle each one.

Ask a pro →
01

Lingering smoke odor after the fire is out

We pair soot removal with hydroxyl generators and thermal fogging to neutralize odor at the source, not mask it. Most customers notice the difference the same day we finish, and we do a final walkthrough with you before we leave.

↗
02

Soot residue on walls and ceilings that keeps coming back

We match the cleaner to the soot type, rinse, and then seal with an encapsulant sealer or primer. That stops the bleed-through. On a recent Medina job, a hallway that had been repainted twice without sealing finally stayed clean.

↗
03

Smoke-damaged HVAC ducts spreading soot

We clean and seal accessible ductwork, replace filters, and run air scrubbers with HEPA filters until particulate counts drop. We also check the furnace and AC cabinet for residue before we call the job done.

↗
04

Water damage from firefighting turning into mold

We extract standing water, set industrial dehumidifiers and air movers, and monitor with moisture meters until readings are back to normal. Soot removal and drying happen together so you are not dealing with a second problem two weeks later.

↗
Proof you can check

Licensed, Certified, and Local to Medina

✓
IICRC Fire and Smoke Restoration Technician (FSRT)Institute of Inspection, Cleaning and Restoration Certification
✓
EPA Lead-Safe Certified FirmU.S. Environmental Protection Agency
✓
Washington State Contractor LicenseWashington State Department of Labor & Industries
✓
King County Business LicenseKing County, Washington
✓
OSHA 10-Hour Construction SafetyOccupational Safety and Health Administration
Good questions

Frequently Asked Questions About Soot Removal in MEDINA

(833) 929-6186 →

Most soot removal jobs in Medina run $1,200 to $3,800 in 2026, with small single-room cleanups starting around $800 and whole-house jobs after a major fire going higher. Price depends on square footage affected, how many porous materials are involved, whether HVAC cleaning is needed, and how long the soot sat before we got there. We give you a written scope and price before any work begins.

Fire Damage Restoration Medina does. We are a local crew based in Medina, licensed in Washington State, and we handle soot cleanup in MEDINA, Washington and across King County. We answer the phone 24/7, arrive in 60 to 90 minutes for emergencies, and document every job for insurance. Call (833) 929-6186.

Yes, when it is done with the right method. Dry soot comes off with HEPA vacuums and chemical sponges; oily soot needs a pH-matched cleaner and a rinse. We test a small area first to confirm the cleaner will not damage the paint or drywall paper. On older Medina homes, we also follow EPA Lead-Safe practices so we do not disturb lead paint under the soot.

In most cases, yes. Homeowners insurance typically covers soot cleanup when it results from a covered fire or puffback, and we work with most major carriers. We photograph every affected surface, log moisture readings, and write a scope your adjuster can process quickly. You pay your deductible; the rest usually goes through the claim.

Ready when you are

Get Soot Removal MEDINA WA Started Today

Soot gets harder to remove every hour it sits. Call (833) 929-6186 and we will give you a real arrival window, a written scope, and a price before we start. Licensed, insured, and local to Medina.

Call for Same-Day Service (833) 929-6186 →
Request an appointment

Contact Our MEDINA Fire Damage Restoration Team

Call (833) 929-6186 any hour of the day. Our line is staffed 24/7, and we dispatch same-day across Medina, Downtown Medina, and the surrounding King County townships. If you prefer email, send photos and your address to info@firedamagerestorationmedina.com and we will call you back within the hour.

Request received — our team will be in touch shortly.
Tap to call(833) 929-6186