Renters get fast, documented, insurance-friendly fire cleanup

Tenant Fire Damage Cleanup MEDINA WA Done Right

Tenant Fire Damage Cleanup MEDINA WA is what we do when a kitchen flare-up, electrical fire, or candle accident leaves your rental full of soot and smoke. We handle renter fire damage cleanup in MEDINA for tenants who need the unit livable again and a paper trail their landlord and insurer will accept. Call (833) 929-6186 and we roll a crew to your door.

↗
Fast online booking

Request service today

Tell us what is happening. Our local team will confirm your visit shortly.

No spam. No obligation. Just practical help.
Thanks — we'll call shortly to confirm your visit.
Tenant Fire Damage Cleanup you can count on
Careful work. Honest options.
About this service

What Tenant Fire Damage Cleanup MEDINA WA Covers

Tenant Fire Damage Cleanup MEDINA WA is the category of restoration work that removes soot, smoke residue, and firefighting water from a rented home and returns it to a safe, habitable condition. It is needed the moment a fire is out and the tenant is standing in a blackened doorway wondering what is theirs to fix. Our technicians start with a thermal imaging camera and moisture meter walk-through, then build a room-by-room scope that separates tenant contents from landlord structure so nobody argues later.

In MEDINA, most renter fire calls we run come from kitchen grease fires, overloaded outlets in older rental stock, and space heaters in the colder months. King County winters push people indoors and raise the load on wiring that was never sized for it. If you are searching for renter fire damage cleanup near me MEDINA, the first thing we do is stop secondary damage: board the opening, extract suppression water, and set air scrubbers before mold gets a foothold in the drywall.

  • ✓ Documented for Insurance
  • ✓ Soot Stopped in Hours
  • ✓ Water Damage Handled Too
  • ✓ Landlord Coordination
What's included

What Tenant Fire Damage Cleanup Includes

Every job starts with a documented scope, so you know what is covered before we touch a wall. The core service covers stabilization, soot and smoke removal, water drying, and clearance documentation. Structural rebuild and contents replacement are scoped separately and priced on their own line.

✓

Emergency Board-Up

Windows, doors, and roof openings secured the same day so the unit is not open to weather or theft. We use plywood and roofing shingles sized to the opening and photograph the finished work.

✓

Water Extraction and Drying

Standing suppression water extracted, then industrial dehumidifiers and air movers run until moisture meter readings match dry standard. Typically 3 to 5 days on a single-room fire.

✓

Soot and Smoke Removal

HEPA vacuuming, soot sponges, and surface sealing on walls, ceilings, and salvageable contents. Ductwork cleaned and sealed so smoke odor does not recirculate.

✓

Odor Treatment

Thermal fogging or hydroxyl generator run for 24 to 48 hours depending on severity. Charcoal odor absorbers left in closets and cabinets for the residual smell.

✓

Claim Documentation

Photo log, moisture readings, and a written scope split into structural and tenant sections. This is the file your adjuster and your landlord both receive.

✓

Clearance Walk-Through

Final moisture verification and a walk-through with you and the property manager. We do not sign off until the unit is dry, odor-free, and ready for occupancy.

How it works

How Our Cleanup Process Runs

01

Emergency Call

You call (833) 929-6186 and describe the fire. We ask about the room of origin, whether the power is off, and whether the fire department already released the scene. A crew is dispatched with board-up materials and extraction equipment, and we give you a realistic arrival window on the phone.

02

Safety and Scope

On arrival we check for charred structural framing, melted electrical wiring, and gas or CO issues before anyone works. Then we walk the unit with a thermal imaging camera and moisture meter, mark affected zones with tape, and photograph everything for the claim file. This takes 45 to 90 minutes on a typical apartment.

03

Stabilize and Dry

We board windows and doors, tarp roof openings, and extract suppression water with truck-mount or portable units. Industrial dehumidifiers and air movers go in the same day, and we set a negative air machine with HEPA filters to keep soot particles from migrating into unaffected rooms.

04

Soot and Odor Removal

Ceilings and walls get HEPA-vacuumed, then wiped with soot sponges and a Benefect or Fiberlock-approved agent. Porous materials that cannot be saved come out. We finish with thermal fogging or a hydroxyl generator run, typically 24 to 48 hours, to break down the lingering smoke odor at the molecular level.

05

Clearance and Handoff

We re-meter moisture, take clearance photos, and give you a written summary with before-and-after documentation. If structural repair after fire is needed, we scope it and coordinate with the landlord. You get a clean, dry, odor-free unit and a file you can hand straight to your adjuster.

Tools & methods

Tools and Methods We Use

Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.

Thermal imaging camera

Finds hidden hot spots, char inside wall cavities, and moisture behind drywall that a visual inspection misses.

Air scrubber and negative air machine

Keeps soot particles from migrating into clean rooms during cleaning and filters the air down to HEPA level.

Hydroxyl generator and ozone generator

Breaks down smoke odor at the molecular level. Hydroxyl units are used in occupied-adjacent spaces; ozone only in unoccupied units.

Industrial dehumidifier and air mover

Dri-Eaz and Phoenix Restoration Equipment units pull suppression water out of framing and subfloor to dry standard.

HEPA vacuum and soot sponges

Lifts fine soot from walls, ceilings, and salvageable contents without smearing it into the surface.

Moisture meter

Verifies dry standard daily and produces the readings that go into the clearance report.

Drywall saw, pry bar, sledgehammer

Opens wall cavities for inspection and removes charred or soaked material that cannot be saved.

Real results

Before and after.

Kitchen Fire, Downtown Medina Rental

Before

A grease fire scorched the upper cabinets and range hood and left a sticky soot film across the ceiling and living room. The tenant had wiped the walls twice and the smoke smell was still strong. Suppression water had soaked the subfloor near the sink.

After

We degreased and sealed the cabinets, replaced the hood and the drywall behind the range, extracted the subfloor water, and ran a hydroxyl generator for 36 hours. Moisture readings matched dry standard on day four and the odor test came back clear.

Bedroom Outlet Fire, North Broadway

Before

An overloaded outlet melted the receptacle and charred the wall cavity. The fire department cut power and left the room open. Soot stained the ceiling and the closet smelled of burned plastic. The tenant was told the unit might be uninhabitable for two weeks.

After

We removed the charred wiring and drywall, cleaned and sealed the cavity, coordinated the electrical repair, and patched and primed the wall. The closet was treated with charcoal odor absorbers. The unit was cleared for occupancy on day six.

Candle Fire with Sprinkler Water, Lake Medina Area

Before

A candle caught a curtain and the sprinkler head activated, putting out the fire but leaving about 200 gallons of water in the carpet, pad, and subfloor. The bedroom was unusable and the tenant was worried about mold.

After

We extracted the standing water, removed the soaked carpet and pad, set industrial dehumidifiers and air movers, and dried the subfloor over four days. A two-week follow-up showed no mold growth and moisture readings within dry standard.

Problems we solve

Problems Tenant Fire Cleanup Solves

A fire leaves more than char. These are the problems we see in MEDINA rentals every week and how we get ahead of them.

Ask a pro →
01

Lingering smoke odor that will not leave

We remove the porous materials that cannot be saved, HEPA-vacuum and seal the rest, then run a hydroxyl generator or thermal fogging treatment. Most units clear in 24 to 48 hours, and we verify before we call the job done.

↗
02

Soot residue etching walls and fixtures

Our crew HEPA-vacuums and sponges surfaces the same day we arrive, then applies a primer to lock the stain. We document what was cleaned versus what had to be replaced so the claim reflects reality.

↗
03

Water damage from firefighting

We extract standing water, set industrial dehumidifiers and air movers, and dry to ANSI/IICRC S500. Moisture meter readings are logged daily and included in the clearance report.

↗
04

Smoke-damaged HVAC ducts

We clean and seal accessible duct runs, replace HEPA filters, and use duct sealing tape on joints. Air scrubbers run during the work to keep particles from spreading into clean rooms.

↗
Proof you can check

Licensed, Certified, Accountable

✓
IICRC Fire and Smoke Restoration Technician (FSRT)Institute of Inspection, Cleaning and Restoration Certification
✓
IICRC Water Damage Restoration Technician (WRT)Institute of Inspection, Cleaning and Restoration Certification
✓
EPA Lead-Safe Certified FirmU.S. Environmental Protection Agency
✓
Washington State Contractor LicenseWashington State Department of Labor & Industries
✓
King County Business LicenseKing County
Good questions

Frequently Asked Questions

(833) 929-6186 →

Typical 2026 pricing for a single-room renter fire runs $1,800 to $6,500, and whole-unit jobs with structural repair can reach $12,000 or more. Cost is driven by square footage affected, how much porous material has to be removed, and how long odor treatment runs. Most renter policies cover the cleanup and your contents; we document everything so the adjuster sees the same scope we do.

We do. Fire Damage Restoration Medina sends IICRC-certified crews across MEDINA and King County, including Downtown Medina, Medina Square, and the Lake Medina Area. Call (833) 929-6186 and we will confirm a window, bring board-up and extraction equipment, and start the same day in most cases. We work directly with tenants, landlords, and property managers.

In Washington, the landlord is generally responsible for restoring the structure and the tenant for their own contents and any damage caused by their negligence, but the lease and the cause of the fire decide the split. We scope the job in two parts, structural and tenant, so each side's insurer sees exactly what it owes. That separation is the fastest way to avoid a deposit dispute.

Most renter policies cover smoke and fire cleanup, contents replacement, and additional living expenses while the unit is uninhabitable, up to your policy limits and deductible. We photograph and log every affected item and surface before work begins, which is the documentation your adjuster needs. Call us and we will walk you through what your policy likely covers before you file.

Ready when you are

Get Tenant Fire Damage Cleanup MEDINA WA Today

Soot stains set in 72 hours and mold can start in wet framing within 48. Call (833) 929-6186 and we will dispatch a certified crew to your MEDINA rental, document the loss for your insurer, and start drying the same day.

Call Now (833) 929-6186 →
Request an appointment

Contact Our MEDINA Fire Damage Restoration Team

Call (833) 929-6186 any hour of the day. Our line is staffed 24/7, and we dispatch same-day across Medina, Downtown Medina, and the surrounding King County townships. If you prefer email, send photos and your address to info@firedamagerestorationmedina.com and we will call you back within the hour.

Request received — our team will be in touch shortly.
Tap to call(833) 929-6186